Electric Bird Barrier with 3 Electrodes
Electric Bird Barrier with 3 Rows of Carrier Rods with Isolators
7,56 €
in business
guaranteed
in EU
The electric bird barrier with 3 electrodes is designed to effectively deter pigeons, crows, sparrows, and other birds from nesting on protected surfaces such as windowsills or ledges. The system consists of stainless steel plates with 3 rows of carrier rods, each equipped with isolators at the ends. These rods, with a 2 mm diameter, are inserted into the holders and connected by stainless steel springs, allowing for electrical conductivity along the entire length.
A pulsed voltage of approximately 5,000 volts at 16 mA is applied to the rods (electrodes), which are safe for the birds but effectively deter them from approaching the protected area. The installation is simple— the rods are spaced approximately 35 cm apart and can be attached by gluing or screwing them into place.
This barrier system provides long-lasting, humane protection against bird nesting without causing harm to the birds.
Installation:
Before installation, ensure that the surface is cleaned and degreased for optimal adhesion.
| Weight | 0,08 kg |
|---|---|
| Priemer tyčky (d) | 4.0mm |
| Min výška tyčky (H1) | 67.2mm |
| Max výška tyčky (H2) | 81.2mm |
| Vzdialenosť tyčiek (p) | 50mm |
| Dĺžka pásu (L) | 110mm |
| Šírka pásu (s) | 30mm |
| Hrúbka pásu (t) | 2.0mm |
| Materiál | Nerezová oceľ 1.4301 |
| Pripevnenie | Skrutkovaním / Lepením / Nitovaním |
